How to Make a Racing Lawn Mower

Lawnmower racing is the most affordable form of motor sports that is gaining popularity. Its biggest attraction is that it provides fun and enjoyment. There are many people who want to get started with lawnmower racing. However, prior to getting started, one should learn the basics of how to build a racing lawn mower.

Prepare The Materials

Before building the lawn mower, you need to prepare the materials for the construction of the racing lawnmower. You need to have access to the following materials:

  • Drill
  • Sandblaster
  • T Drives
  • Jigsaw
  • Brake Parts
  • Angle Grinder
  • Welder

Get Hold of a Second Hand Lawn Mower

The first step on how to build a racing lawn mower is to remove all the parts of a second hand lawn mower except the chassis. Use a sandblaster to clean and remove the dust and rust on the surface of the chassis.

Strengthen the Chassis

The next stage on how to build a racing lawn mower is to strengthen the chassis. Use metal for the components located on the back axle. You can seek the help of a professional in welding the parts or do it yourself only if you have the experience.

Assemble The Back Axle

The next step on how to build a racing lawn mower is to assemble the back axle. To make sure that the assembly is precise and of the best quality, you may hire the services of a precision engineering firm.

Installing The Other Components

After installing the back axle, the next step is to make cutouts for the engine plate. Use a jigsaw, hole saw, or drill for cutting the plate. Next, you need to prepare the steering wheel, engine, spare tire, and wheels. You can procure cheap spare parts through the classified ads of newspapers or magazines.

If you opt to buy the parts online, there are lots of sellers who are willing to sell spare parts. These sellers provide spare parts for go-karts.

Fitting The Parts to the Lawn Mower

The next stage in the building process is to connect the steering set to the chassis. For your own safety, use protective goggles when welding. After connecting the steering set, you need to place the wheels, tires, and back axle. If this is your first time to do so, get help from someone who has experience in fitting the parts.

Next, fit the brake caliper and customize your pedals to make way for the brake, clutch, and accelerator. The engine, clutch, pulleys, and belts are the next to be fitted.

For the frame of the steering wheel, weld it yourself or with professional help. For this, you will need a steering wheel and seat. You can look for one that can suit your own taste.

Take The Lawn Mower Out For A Spin

The final stage on how to build a racing lawn mover is to test drive it. By doing so, you will have a clearer picture of how it operates as well as to detect problems in the steering wheel or brakes. For better evaluation, take the lawn mower to different terrains.

Learning how to build a racing lawn mower helps you gain enjoyment and experience in this budding sport.

VN:F [1.9.22_1171]
Rating: 6.8/10 (4 votes cast)
How to Make a Racing Lawn Mower, 6.8 out of 10 based on 4 ratings
You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

You must be logged in to post a comment.