How to Build a Brick Wall

Learning how to build a brick wall can be quite challenging. It requires finding the appropriate material in order to construct one that will be long standing. Building a brick wall needs extra caution because you have to make it survive all weather conditions in order to lessen repairs on the wall.

Prior to construction of the brick wall, it is important to purchase the right cement and bricks because it determines the life span of the wall.

Buy The Materials

The first step on how to build a brick wall is to prepare the materials. You will need cement, bricks, shovel, trowel, and measuring tape. The amount of bricks will depend on how long and wide the wall will be.

Prepare The Flooring

When the materials are available, you need to find a place where the wall will be placed so it will be aligned vertically. Make sure that the area is clear from any obstacle that will impede in the construction of the wall.

When the concrete floor has been cleared, determine its length to be sure that the wall will be aligned perfectly. Wet the bricks so they will not drive water to the concrete floor. With a chalk line, mark the area where the wall will be constructed.

When learning how to build a brick wall, you should construct it at the end of the concrete floor instead of the center. This way, you will be able to determine its distance as you build it.

Place The Bricks

The next stage in the construction of the wall is to mix the bricks and the cement. This part of how to build a brick wall can be tricky because you need to consider the spacing between the bricks. You need to make sure that there are no spaces in between the bricks. Place the cement below the bricks so they would have a firm foundation.

The bricks will serve as the base of the wall so you need to make sure that there is sufficient cement at the base to allow it to have a strong foundation

When the bricks have been laid halfway through the concrete flooring, it is vital to add the first layer of bricks on the ground. Likewise, you need to make sure that there are no huge spaces between the bricks or else the wall may not have a strong foundation.

Make The Finishing Touches

The nest stage in how to build a brick wall is to check the alignment of the bricks. With a 1/8-inch cord, measure one end of the bricklayer to the next. If it stretches vertically from end to end, then the walls are perfectly aligned. Allow the cement on the wall to dry up.

Do this to each layer of the brick and your wall will be standing in no time.

As you can see, learning how to build a brick wall can be easy if you follow the steps above.

VN:F [1.9.22_1171]
Rating: 10.0/10 (1 vote cast)
How to Build a Brick Wall, 10.0 out of 10 based on 1 rating

Related Posts

Comments: